> Use
RGB 501191 model, 16 On/Off programs
Manual program including
11 static colours and 5 controlled atmospheres
Recommendations :
In all cases, refer to the
leaflet provided with the
product.
In case of difficulty during
the installation or use, it
is recommended to
watch
the installation
video
and to read the
FAQ
on our website.
The RGB flat projector On/Off control is manual, using the on/off switch of the
projector power. A cut of the current of less than 2 seconds makes the program change.
After a cut of the current for over 10 seconds, switch on restarts from the last program
used.
For the first use, the projector lights on the program 1 (all LED lit). Then you go to
the 11 static colours, followed by 5 automatic programs.
It is as well possible to use a
~
12V radio switch and install it on the
~
220V/12V
safety isolating transformer output.
To be synchronized on the On/Off manual mode, the projectors must be connected
to the same power supply.
