- 22 -
Figure10
4th Computer settings (upper heater)
1) Click on the icon, the screen display as (Figure 11), bottom of the
screen for setting the temperature curve parameters, drag the
cursor point 160, with reference parameter set reference value in
the table of parameters to be modified.
2) After the setting of the paragraphs parameter, click on as (Figure 11)
"to download data to the instrument" so that the data can be
stored in the instrument, (Remark: The group number displayed
on the meter number during transmission is the NO. of the data
that transmitted, the original number of the data in the instrument
will be overwritten)
