DO2 INSTRUCTIONS
Seametrics • 253.872.0284
Page 4
seametricscom
What is the DO2 Sensor?
The Seametrics
DO2 Smart Sensor is the next generation in trouble-free oxygen
sensing design. Utilizing fluorescence of a stable, immobilized ruthenium-based
film matrix, the sensor provides precision optical transmission and detection to
measure oxygen concentration in the fluid outside of the sensor.
This industry standard digital RS485 interface device records over 250,000 records
of dissolved oxygen, temperature, and power supply voltage data, operates with
low power, and features easy-to-use software with powerful features.
The unit is programmed using the easy-to-use Aqua4Plus control software. Once
programmed the unit will measure and collect data on a variety of time intervals.
The internal microprocessor runs on 12 VDC and automatically turns the sensing
unit on and off, as needed, to conserve power.
Initial Inspection and Handling
Upon receipt of your smart sensor, inspect the shipping package for damage. If
any damage is apparent, note the signs of damage on the appropriate shipping
form. After opening the carton, look for concealed damage, such as a cut cable. If
concealed damage is found, immediately file a claim with the carrier.
Do’s and Don’ts
Do
handle the device with care.
Do
store the device in a dry, inside area
when not in use.
Do
install the device so that the connec-
tor end is kept dry.
Don’t
scratch the sensing window.
Don’t
support the device with the con-
nector. Use a strain relief device to
take the tension off the connec
-
tors.
Don’t
allow the device to free-fall down
a well as impact damage can oc-
cur.
Don’t
bang or drop the device on hard
objects.
INTRODUCTION
Summary of Contents for DO2
Page 2: ......
