OPTIMUS SEASTATION QUICK REFERENCE GUIDE
Drift Warnings
To Engage SeaStation:
SeaStation Tips
Heading Bump:
3831 No. 6 Road, Richmond,
B.C. Canada V6V 1P6
tech support: 604.248.3858
web:
www.seastarsolutions.com
OVER
If the vessel drifts too far from its target position or heading, the display
will alarm:
1.
The Joystick must be in command of the vessel
2.
Press the POSITION and/or HEADING buttons on the joystick
3.
Press “Engage” on the display
• Grab the joystick at any time for immediate control (this will
disengage SeaStation).
•
Align your vessel stern to wind / current to reduce engine activity.
•
POSITION MODE on its own requires less engine activity than when
combined with HEADING MODE.
•
SeaStation acquires your target position or heading when “Engage”
is pressed on the display.
•
POSITION and HEADING modes can be toggled on and off at any
time while SeaStation is active. Targets will be re-acquired.
•
SeaStation will continue to work towards its targets.
•
It may benefit to better align your vessel with the wind or current;
however, some conditions may be too strong
When HEADING MODE is active, the target heading can be adjusted
without disengaging SeaStation.
Engages SeaStation
©2016 Marine Canada Acquisition Inc. PID# 682176A 09/16
WARNING
The operator should never
leave the helm when
SeaStation is engaged.
