From the AIS list of ships you can choose a single target using the
▼, ▲
- (3) buttons.
Once you have selected the desired ship, press “ENT” (4) for detailed information about
this AIS target.
Depending on the ship class A or B (see AIS list, column “TYPE”) there are different ship
information. Likewise, you can call up information about an AtoN.
A Class A signal contains the following information:
•
Ship name
•
Country
•
Ship typ
•
MMSI
•
Call-sign
•
Current position
•
Speed (SOG)
•
Course (COG)
•
CPA Alarm
•
TCPA Alarm
•
Position of the GPS
Antenna
Besides class B signal information, a Class A signal contains the following data:
•
ROT (Rate of turn)
•
Destination
•
ETA (Eastimated time of arrival)
•
NAV Status
- Underway using engine
- Moored
- Limited maneuverability
- At anchor
- Not under command
- Grounded
- Engaged in fishing
•
Length, width and draft of the vessel
Information about an AtoN (Navigation support)
An AtoN can characterise different objects, such as
virtual tons, drilling platforms, windparks, etc.
The AtoN signal contains the following informations:
•
Name of the AtoN
•
Type of AtoN
Virtual (for example, virtual ton) or real (Windpark)
•
Spezification
•
MMSI of the AtoN
•
Position of the AtoN
•
Position of the GPS Antenna
•
Dimensions of the AtoN (Lenght/Width)
11
“ENT” (4)
Summary of Contents for AIS6
Page 1: ...User Manual AIS6 MFR6...
