Seav 94460000, Manual

- 6 -

Rev. 3.0   13/06/2016

The products

EASY LIGHT -  EASY LIGHT 230V

comply with the specifications of the Directives

LVD 2014/35/EU, EMC 2014/30/EU.

I

MPORTANT FOR THE INSTALLER

The product does not have any type of isolating device for the 230 Vac

line. It will therefore be the responsibility of the installer to arrange an

isolating device inside the plant. It must be positioned where it can be

protected from accidental closing, according to that prescribed in

point 5.2.9 of EN 12453. 

Wiring of the various electrical components outside of the product

must be carried out in compliance with that prescribed in Standard EN

60204-1 and its amendments at point 5.2.7 of EN 12453. Power sup-

ply and connection cables must be fixed using the cable glands that

can be supplied as an optional.

Pay attention while making holes in the outside casing, when passing

cables for connection and power supply and assembling the cable

glands, that everything is installed in a way that keeps IP protection

characteristics of the panel unchanged as much as possible.

Pay careful attention when fastening the cables so that they are

anchored in a manner that is stable.

The back casing is not equipped with suitable predispositions for fix-

ing to a wall (predisposition for holes for fixing using anchors or holes

for fixing using screws). Plan and implement necessary solutions to

achieve an installation that does not alter the IP protection.

I

MPORTANT FOR THE INSTALLER

- ATTENTION: keep this instruction manual and respect the important

safety prescriptions contained herein. The non compliance with the

prescriptions may cause damages and serious accidents.

- The device must never be used by children or persons with reduced

physical-psychological abilities, unless supervised or trained on the

functioning and the use modalities.

- Frequently examine the plant to detect any signs of damaging. Do not

use the device if a repair intervention is necessary. 

Attention

All operations which require the opening of the casing (cables connec-

tion, programming, etc.) must be carried out by expert personnel dur-

ing installation. For any further operation which requires the casing to

be re-opened (re-programming, repair or installation amendments)

contact the after-sales assistance.