Operating Instructions
10
3 Performing Tests
Press CLI and CLII keys simultaneously to switch on
the PAC3760 DL. When the unit is ready the display
will be as shown below.
PAC3760 DL
3.1 Testing a Class I Appliance
Visually inspect the appliance as per requirements of
AS/NZS 3760:2010. If the appliance passes a visual
inspection proceed with the electrical tests.
Plug the earth test lead into the Earth Continuity test
terminal on the PAC3760 DL end panel.
Plug the appliance into the PAC3760 DL front panel
test socket.
Connect the earth test lead to an exposed metal part
on the appliance.
If the Appliance under test has an ON/OFF switch,
make sure it is in the ON position.
Press the Class I test button to start a Class I test
sequence.
The PAC3760 DL will now test the continuity of the
protective earth.
If the measured value is greater than the 1 ohm pass/
fail threshold, the measured value is displayed and the
unit indicates a fail result as shown below.
