Operating Instructions
19
Procedure A:
1. Plug powerboard lead into mains outlet socket on
the PAC3760 DL.
2. Plug IEC Lead into the IEC socket on the top of the
PAC3760
DL.
3. Plug the IEC Lead plug into the fi rst socket of the
EPOD.
4. Press Class I test button to perform a complete
test sequence covering earth, insulation and
polarity to test the socket.
5. Repeat sequence on every socket.
Procedure B:
1. Plug powerboard lead into mains outlet socket on
the PAC3760 DL.
2. Plug IEC Lead into the IEC socket on the top of the
PAC3760
DL.
3. Plug the IEC Lead plug into the fi rst socket of the
EPOD.
Note:
First socket is defi ned as the closest
socket to the power lead.
4. Press the Class I and LKGE buttons simultaneously.
The PAC3760 DL performs an earth test.
5. The PAC3760 DL will give warning beeps. Repeat
step 4 on every socket until the last socket – press
buttons for 2 secs.
6. At the last socket, press the Class I button to do a
complete
test.
Note:
Last socket is defi
ned as the socket
furthest from the power lead.
PAC3760 DL
