Map function
94
To draw, change or delete pipelines in the map, proceed as follows:
Step Description
1
Tap the sensor icon which represents the start point of the line.
2
Tap the sensor icon which represents the end point of the line.
3
Tap the
Pipe
button.
Result:
If there is no line between the two sensors in question so far, first the
following screen appears.
Tap the
Add
button.
Result:
The Pipe data menu opens.
5
You can divide the displayed pipeline into individual sections if the line between
the sensors is not consistently of the same material or diameter.
Use the buttons
Add
and
Delete
to create or remove pipe sections.
To select a section, tap directly on the relevant section in the graph or use the two
arrow keys. The currently selected section is underlined white.
6
Enter the pipe data (material, diameter, length) for each pipe section.
Use the Back
button to return to the Map menu.
Draw pipelines
Summary of Contents for Correlux C-3
