MAN_Easyflex_com_eng_01.doc
23
Use the cursor when you want to change the position of the section and
change the X zoom factor when you want to change the width of the
section.
Fig 3: Reflection by the 2 m Interconnect Cable
The LC display will display a warning signal top left when the remaining
charge of the accumulator is insufficient for further operation. Replace the
accumulator or charge it in order to restore readiness for operation. Switch
the instrument off before replacing the accumulator to retain all data.
Press one of the following keys for ca. 1.5 s to return to the default value.
Function
Key(s)
Default value
Cursor
Cursor
0.0 m/ft/µs
Gain
Gain
0 dB
Compensation
Comp
120
Ω
Pulse propagation
velocity
v
/
2
NVP
99.9 m/µs or 327.9 ft/µs
or
0.667
Horizontal zoom
Zoom
1 (full range)
Mode of connection
Line
L1
Mode of operation
Mode
Single
Contrast
Light key
(press for 3 sec)
standard contrast
