SebaDataView-3 software
48
Continue as follows:
Step Description
4
Enter a password for User level 1, User level 2 and User level 3 each.
Write down the passwords and keep them safe.
Without knowing the passwords, there is no way to gain access to the
SebaDataView-3 software and the password-protected devices.
5
Click on
OK
.
Result:
The window closes. The passwords are adopted by the software and
are valid immediately.
6
Close the application and restart it.
From now on, a login area appears in the start screen above the language selection.
To log in, proceed as follows:
Step Description
1
Click on the drop-down menu and select a user level.
2
Enter the corresponding password in the input field.
3
Click on
OK
.
Result:
The user interface of the application opens with full or limited
functionality, depending on the user level.
7.7.3
Extend password protection to devices
The SebaDataView-3 password protection can be extended from the software to
SebaKMT devices, so that these devices can only be used by authorized persons.
You will find more information in a separate section of this manual.
Set passwords
Login
Summary of Contents for Sebalog D-3
