5-41
When a maximum threshold is exceeded, the device connected to the internal relay
is switched on. The device is switched off as soon as the measured value falls below
the threshold again. This applies for the lower threshold the other way around.
A relay cannot be assigned to more than one alarm. If a relay is already
included in an existing channel configuration, it cannot be used in combination
with any other channel or switching input (see section 5.3).
5.2.3
Finishing the Configuration
Confirm and save the configuration of a channel by clicking the Save button.
Perform the configuration for the remaining channels.
Summary of Contents for Sebalog D
Page 2: ......