5-48
5.4.7
Testing the GSM Settings
You can send a test email or a test SMS in order to check whether a GSM
connection can be established with the active settings. Furthermore, the FTP settings
can be tested by creating a file to the respective FTP folder.
The GSM configuration must have been already finished (see previous
sections) and the settings must have been transferred to the logger before a
test can be performed (see section 5.8).
5.4.7.1 Testing SMS / Email Transmission
Perform the following steps to send a test SMS / email:
Step
Action
Click on the Test GSM settings button.
1
Result: A new window appears
Click on the Send Test SMS button or the Send Test eMail button in
order to send a test SMS or email respectively. During transmission, the
I/O control lamp
is lit orange.
2
Result: If the transmission has been successfully completed, all
addressees should receive a SMS or email of the following layout:
2
LOG D; ID 00815
(comment):
18.03.2008
12:44:27
SignalQ: 13
NetWorkReg: 1
Identification number of the logger
Date and time of the test
Signal quality
Network registration status
Summary of Contents for Sebalog D
Page 2: ......