6-53
6.2
Collecting Data from the FTP Server
If the logger is equipped with a GSM modem, the logged data can be automatically
transmitted to a FTP server (see section 5.4.4). You can access a FTP server from
any PC with an internet connection.
Proceed as follows to download the data from the FTP server:
Step
Action
1
Select Program Settings -> Settings from the menu bar and enter
server address, username and password into the respective fields under
FTP settings. Confirm the settings by clicking the Save button.
2
Mark the logger, you want to collect the data from, in the logger tree.
Proceed in one of the following ways:
o
Select
from the toolbar.
o
Right-click on the logger in the logger tree and select Read data
from the context menu.
3
Result: A new window appears.
4
If you would like to receive only these data sets which are not already
contained in the local database, check the Read only new data
checkbox. Since, in most cases, the data is downloaded via broadband
connection, this option does not affect the transfer time.
5
Click on the Read data from FTP server button to download the data
from the FTP server.
A progress bar indicates the progress of the transmission.
6
After the data transfer has been finished, click on the Open button. A
new window appears and the data is presented in a diagram.
You can evaluate the data and change the way the data is represented
in the diagram using the functions described in section 6.3.
Summary of Contents for Sebalog D
Page 2: ......