19
Rates and expos
Use the racommanded expos to soften the feel of the model, expecially on high 3D rates. The goal
is to get the model to feel the same around neutral as it does on low rates.
Use low rate settings for all flying, included starts and landings,
except for 3D aerobatics.
For precision flying or general sport fliers, the low rate throws are perfect, even for snap rolls.
When doing 3D aerobatics, flip to 3D rates just before the manouer. As soon as the manouver is
done, flip back down to low rate to avoid over-controlling the model.
Recommended CG
The recommended
Center of Gravity
location is
115mm
behind the leading edge of
the wing against the fuselage: exactly in center of the wings carbon tube.
¾
110mm
is good for pattern flying.
¾
120mm
is good for 3D flying.
Use the battery pack, moving it forward or backward, to achieve the correct balance.
Range test your radio
step 1
Before fly, be sure to range check your radio as manufacturer’s instruction manual of you radio-
system recommand.
step 2
Double-check all controls (aileron,elevator, rudder and throttle) move in the correct direction.
step 3
Be sure that your batteries are fully charged, per the instructions included with your radio.
))LLQQDDOOOO\\
KKDDYYHHDDQQLLFFHHIIOOLLJJKKWW
SebArt
di Sebastiano Silvestri
Via Roma 83/85
38017 Mezzolombardo (TN) – Italy
www.sebart.it
