background image

 

10 

Ensure that the housing and the air slots are free from contamination at all times, in order to 
ensure proper functioning. 

Note: 

Never open the housing to clean the unit from the inside. This can impair the functionality 

and the warranty guarantee will be extinguished!! 

 

11. Disposal of waste batteries 

 

Batteries and rechargeable batteries may not be disposed in the household waste. The end-
consumer are legally obligated to the return of all used batteries and/or accumulators. After usage 
you can return batteries and / or accumulators gratuitous in the sales point or in their direct vicinity 
(for example at municipal collection points and trade). Otherwise, you can also return the batteries 
and / or accumulators by post to us: SEBSON - Gernotstr.17-44319 Dortmund 

– Germany 

 

Batteries and / or accumulators which contain harmful substances are marked with the 
symbol of a crossed-out waste bin and may not be disposed of with household waste 
Under the dustbin symbol is the chemical name of the harmful substance - in the 
example below - "CD" for cadmium, "Pb" stands for lead, "HG" for mercury .  

 

Meaning of symbols: 

 

 

 

 

1 Battery containing more than 0,002 mass percent of cadmium 
2 Battery containing more than 0,0005 mass percent of mercury 
3 Battery containing more than 0,004 mass percent of lead 

The harmful substances which are contained in the batteries, may cause danger to health and the 
environment in case of improper disposing.  

 

12. General Disposal  

 

This product may not be disposed of with household waste. At the end of its useful life, 
the product must be returned to a point of acceptance for the recycling of electric and 
electronic device. Please ask your local municipality for the point of acceptance! As the 
devices contain valuable recyclable materials, they should be sent for recycling, in order 

not to harm the environment or human health from uncontrolled waste disposal. 

 

Summary of Contents for GS506G












Reviews: