13
SEBSON - Sebastian Sonntag - Gernotstr.17 - 44319 Dortmund Germany - www.sebson.de
Commissioning of the base station/ Inbetriebnahme der Basisstation/ Mise en service de
la station de base/ Puesta en funcionamiento de la estación base/ Messa in funzione
della stazione base
Connect the supplied power adapter to the base station. Wind the connection cable
completely apart and make sure that the cable cannot be damaged by sharp edges or
heat!
Place the outdoor sensor next to the base station to connect.
Plug the power plug into a wall outlet according to the specifications.
Slide the switch on the back of the base station to "ON".
The base station will immediately connect to the outdoor sensor. While the two devices
are establishing a radio connection, the radio symbol flashes.
After successful connection, the radio symbol disappears from the display.
The outdoor temperature now appears in the display. Every minute, the outdoor sensor
sends the currently measured data to the base station (LED indicator flashes every
minute).
Attach the outdoor sensor to an outdoor location that is protected from strong sunlight and
rain.
Verbinden Sie das mitgelieferte Netzteil mit der Basisstation. Wickeln Sie das
Anschlusskabel dabei vollständig auseinander und stellen Sie sicher, dass das Kabel
weder durch scharfe Kanten noch durch Hitze beschädigt werden kann!
Stellen Sie den Außensensor zum Verbinden neben die Basisstation.
Stecken Sie den Netzstecker an eine den Angaben entsprechende Steckdose.
