12
Operating AnyWhere lights
AnyWhere
lights provide
bright results day after day
using energy from sunlight
alone.
However, before using for
the first time, it is necessary
to activate the electronic
circuitry. This is done by
pressing the Master Switch
at the bottom of the light
unit ONCE (see diagram).
The light is now activated
and the Master Switch
should remain on at all
times, except for when the
lamp is being stored for
long periods without use or
during transportation. In
these cases, press the
Master Switch again to
deactivate the unit and then
reactivate when required.
In everyday use, the Pull
Switch/Cord is used to turn
the lights on/off and adjust
the brightness.
To turn on the light, pull
down on the Pull Switch
once. The light will shine at
its brightest setting, which
is 240 Lumens.
By pulling on the Pull
Switch again the light will
dim by 50%, giving a
brightness of 120 Lumens.
Master Switch
Pull
Switch
Cord
Spool