14
In the unlikely event that
the
AnyWhere
light does
not function when installed
correctly, please consider
the following trouble-
shooting steps:
1) Push the Master Switch
once to deactivate and
once more to reactivate,
and the try switching on
again using the Pull Switch.
2) If the Green indicator is
flashing during daylight
hours, give the lamp some
time to store enough
energy before using again
in the evening.
3) Try unplugging the twist-
fit plug on the
AnyWhere
light and plugging it back in,
before attempting to switch
on the light again. This
action will reset the
protection circuits.
4) Check that all cabling is
connected in the correct
manner and that the twist-fit
plugs are inserted and
locked in place. Replace
any damaged cable or
plugs as required.
Troubleshooting