8
The Solar Panel is
designed to be mounted on
a rigid pole, either on the
roof top or adjacent to it.
The pole should be fixed
with brackets to a roof
support (as shown below).
If roof mounting is not
possible, the pole can also
be fixed to an outer wall of
the building, as long as the
panel can face the Equator
and is not overshadowed at
all. In either case, an
aluminium or galvanized
steel pipe of 26mm
diameter is ideal, but a PVC
pipe is also acceptable.
It is very important that the
Solar Panel points towards
the Equator. If necessary,
adjust the tilt angle at the
rear of the panel so that the
sun’s rays fall directly onto
the surface of the panel at
12.00hrs (midday). This
ensures the best possible
energy collection and
ongoing performance.
Installing the Solar Panel