Double-Door Electromagnetic Locks
Installation Manual
E-941DA-1K2Q shown
Model
Holding Force
†
Material
E-941DA-600Q
600-lb. (272kg) x2
Anodized aluminum
E-941DA-1K2Q
1200-lb. (545kg) x2
Anodized aluminum
E-941DA-600PQ*
600-lb. (272kg) x2
Anodized aluminum
E-941DA-1K2P*
1200-lb. (545kg) x2
Anodized aluminum
*
With status LED and bond sensor
†
Holding force has not been verified by UL
MOV surge protection
Adjustable mounting bracket
Complete mounting hardware for typical installations
"
L" bracket and "Z" brackets available for easy mounting
Detachable faceplate
12/24VDC selectable
NOTES
UL294 Indoor use
The power for the E-941DA series
is to be provided by a Listed (UL294 or UL603) Class 2 power supply.
The E-941DA series
is intended to be used as an access control system accessory, which is installed in
accordance with the manufacturer’s installation and operation instructions, ANSI/NFPA 70 and the local
authority having jurisdiction.
The minimum permissible wire size to be used shall not be less than 22AWG
