®
SD-961A-36
Push-to-Exit Bar
Manual
Features:
For allowing egress from inside an area
normally locked by an electromagnetic lock,
and/or to disarm or trigger an alarm when
the door is opened
Built-in non-latching (momentary), normally
open and normally closed (N.O. and N.C.)
contacts
Attractive brushed aluminum bar with black
base and trim
Two dual-contact switches (NO/COM/NC):
25A@ 24VAC
Length of bar: 34.5 inches (for standard
36-inch wide door), can be cut to size
Pushing the bar at any point will send a
signal to release the lock and/or sound an
alarm
Includes: Armored Door Cord
(SD-969-A18)
