5
ENFORCER Vandal Resistant Flush-Mount Access Control Keypad
SECO-LARM U.S.A., Inc.
Features:
Specifications:
Parts List:
Operating voltage
12~24 VAC/VDC
Current draw
(at 12VDC)
Standby
*
15mA
Keypress
40mA
Output 1 active
65mA
Output 1 & 2 active
66mA
Total max current draw 100mA
Outputs
#1 – Form C
1A@30VDC
#2 – Transistor Ground
100mA@24VDC
Duress
100mA@24VDC
Interlock
100mA@24VDC
Tamper
50mA@24VDC
Inputs
Egress
N.O. Ground
Door sensor
N.C. Ground
Door inhibit
N.O. Ground
Operating temperature
-4°~158° F (-20°~70° C)
Operating humidity
5~95% Non-condensing
IP Rating
IP66
Dimensions (including back box)
4
3/4
”x3
1/8
”x1
13/16
” (120x80x46 mm)
Weight
16.2-oz (460g)
•
12~24 VAC/VDC auto-adjusting operation
•
Up to 1,000 possible user codes (000~999)
programmable for output #1 and 100 (001~100)
for output #2
•
Up to 50 (01~50) possible temporary visitor codes,
which can be programmed for one-time or limited-
time use (1~99 hours)
•
Output #1: Form C relay, 1A@30VDC max.
•
Output #2: Transistor ground, 100mA@24VDC
•
Outputs #1 and #2 can be programmed to activate
for up to 99,999 seconds (nearly 28 hours)
•
Tamper output: N.C. Dry contact, 50mA@24VDC
max.
•
Mounts to standard single-gang back box
•
IP66 Weatherproof rating
•
Keypad illuminates when a button is pressed;
backlight can be programmed for FULL or AUTO in
standby mode
•
All features are programmed directly from the
keypad: No need for an external programmer
•
EEPROM Memory protects programmed
information in case of power loss
•
Up to 50 (01~50) duress codes for output #1,
10 (01~10) for output #2
•
Duress code signals a silent alarm if an authorized
user is forced to open the door under duress
•
Egress input lets users exit the premises without
keying in the code
•
Door sensor input for anti-tailgating operation
•
Interlocking input for connecting to a second
keypad
•
1x Keypad
•
2x Security screws
•
1x Security Wrench
•
1x Diode
•
1x Manual
*
Keypad LEDs off
