ENFORCER Heavy-Duty Outdoor Stand-Alone Keypad
SECO-LARM U.S.A., Inc 11
SECO-LARM U.S.A., Inc.
33
11
Enter:
Step 3
Step 1
Enter a user ID number:
Step 2
0 0 1
2 1 0
to
Enter:
Factory Defaults:
Code length
4 Digits
Master code
1234
Output #1 timer
5 Seconds
Output #2 timer
5 Seconds
Keypad backlighting
10 Seconds after a key press
Setting Output #1 or Output #2 Timer:
NOTE: Default setting is 5 seconds for both outputs.
Deleting All Output #1 or Output #2 User Codes
9 9 9
Programming the Keypad Backlighting
NOTE: Default setting is keypad backlighting is ON for 10 seconds after a key press.
5 5 5
Keypad backlighting is always OFF
0
1
2
Deleting Individual Output #1 or Output #2 User Codes:
Enter:
Step 4
Step 1
Enter:
Step 2
0 1
9 9
to
Step 3
3 0 0
4 0 0
0 0
Output #1
Output #2
Toggle
1 second
99 seconds
Enter:
Step 1
8 8 8
Output #1
Output #2
Enter:
Step 2
Deletes all output codes for the selected output.
Enter:
Step 1
Keypad backlighting is always ON
Keypad backlighting is ON for 10 seconds after a key press
Enter:
Step 2
Step 3
Return to programming
mode by entering:
#
to
0 0 0 0 0
Return to programming mode by entering:
#
Return to programming mode by entering:
#
0 0
Keypad will beep 15 times after deleting output codes.
Step 3
Return to programming
mode by entering:
#
Onlooker-Deterrent Coding:
This keypad has built-in onlooker-deterrent coding to help prevent people in the surrounding area from
guessing a user code or master code by following finger patterns.
4-Digit User or Master Code
Enter up to 8 random digits before the user or
master code to help deter any onlookers. If
more than 8 digits are entered before a code,
the keypad will go into lockdown for 55 seconds.
5-Digit User or Master Code
Enter up to 10 random digits before the user or
master code to help deter any onlookers. If
more than 10 digits are entered before a code,
the keypad will go into lockdown for 55 seconds.
