ENFORCER Split Series Keypad with Proximity Card Reader
24
SECO-LARM U.S.A., Inc.
Programming Duress Codes (continued):
Examples:
1.
Set the duress ID #01 code for output #1 to 2369:
2.
Set the duress ID #01 code for output #2 to 23980:
3.
Delete the duress ID #011 code for output #1 from memory:
4.
Delete all duress codes for output #1 from memory.
Operating Duress Codes:
If a duress code is used in place of a normal user code, both the appropriate outputs #1, #2, or #3
and the duress output will be activated. However, a duress code cannot deactivate the duress
output. Only a normal user code/card, super user code, or a master code can deactivate the
duress output.
NOTE: A duress code can also be used in conjunction with a user card to activate the duress
output. However, a user card alone cannot activate the duress output.
Examples:
In these examples, assume that
is an output #1 duress code and that
is a
user code.
1.
Activate the duress output and output #1 using the duress code:
NOTE: Subsequently entering the duress code will activate output #1 again, but will not
deactivate the duress output.
2.
Deactivate the duress output using the user code:
3.
Activate the duress output and activate output #1 using the duress code and a user card:
READ CARD
