ENFORCER Split Series Keypad with Proximity Card Reader
32
SECO-LARM U.S.A., Inc.
Programming the Egress Delay/Warning/Alarm:
With most keypads, the egress button provides a simple way for someone inside a protected
premises to exit through a locked door by pressing a button instead of using a keypad. However,
in some situations, delaying the egress operation and/or providing some warning or alarm when
the egress button is used is desirable.
For example, in hospitals or schools, it may be desirable to delay the egress operation and
provide a warning to prevent patients or young children from easily leaving the protected area.
For simple egress with no delay, warning, or alarm, do not change this setting. It is disabled by
default.
When programming the egress delay/warning/alarm, use this general formula:
– Program Egress Delay/Warning/Alarm
– Egress Mode
– Delay Time
Egress Modes:
There are six possible egress operation configurations for the SK-4131-SPSQ:
•
Momentary contact with no warning or alarm (default) – Press the egress button
momentarily. The door opens instantly (default) or after the programmed delay time with no
audible warning.
•
Momentary contact with warning beep – Press the egress button momentarily. The
keypad and controller will beep for the programmed delay time before letting the door open,
to warn that someone is preparing to exit the protected area.
•
Momentary contact with warning beep, alarm, and siren – Press the egress button
momentarily. The keypad and controller will beep and the alarm output and siren will activate
for the programmed delay time before letting the door open, to warn that someone is
preparing to exit the protected area.
•
Hold contact with no warning or alarm – Press and hold the egress button for the
programmed delay time until the door is open. This prevents accidental opening of the door.
•
Hold contact with warning beep – Press and hold the egress button for the programmed
delay time until the door is open. The keypad and controller will beep during the delay time
before letting the door open, to warn that someone is preparing to exit the protected area.
•
Hold contact with warning beep, alarm, and siren – Press and hold the egress button for
the programmed delay time until the door is open. The keypad and controller will beep and
the alarm output and siren will activate for the programmed delay time before letting the door
open, to warn that someone is preparing to exit the protected area.
