32
(1) By first use only, switch on main interruptor at the rear of the water cooler.
Water cooler driving is achieved by using control panel of heating module.
- Press key to switch on the water cooler.
- Press key to switch off the water cooler.
Pull simultaneously in opposite ways both white buttons to open the
water tank.
Fill in the tank with pure water (tap water - 7,5 < pH < 9 - 7
°
F < TH < 15
°
F) until the
indicator shows you that the tank is full.
Note: change the water approx. every 6 months.
5.5
Starting
(2) Select operating mode of water cooler:
- B = Remote : water cooler driving is achieved by using control panel of heating module.
- A = Local : water cooler driving is directly achieved by interruptor ON/OFF at the rear.
After first use, it might be necessary to add more
water in the tank (check level).
Afterwards, a regular check of water and quality level is
recommended.
