CQ7-A30
CQ7-A30 - Rev. First Edition: 1.0 - Last Edition: 2.0 - Author: S.B. - Reviewed by G.G. Copyright © 2016 SECO S.r.l.
18
2.4
Mechanical Specifications
The board dimensions are 345 x 170 mm (13.58
”
x 6.69
”
).
Printed circuit of the board is made of six layers, some of them are ground planes, for disturbance rejection.
In order to fix the Qseven
®
module to the carrier board, on CQ7-A30 are soldered four metallic spacers, height 5mm, 2.5mm diameter, that can be used for the
fixing of standard size Qseven
®
modules.
It is possible to solder two further spacers for fixing of
μ
Qseven
®
modules. They are not directly soldered on the evaluation platform since the spacers needed for
fixing of
μ
Qseven
®
modules would interfere with electronic devices soldered on standard Qseven
®
modules.