SBC-C41-pITX
SBC-C41-pITX User Manual - Rev. First Edition: 1.0 - Last Edition: 1.1 - Author: A.R./S.B. - Reviewed by M.B. Copyright © 2021 SECO S.p.A.
58
4.4.2
Uncore Configuration submenu
Menu Item
Options
Description
GOP Brightness Level
20/40/60/80/100/120/1
40/160/180/200/220/2
40/255
Set Graphics Output Protocol (GOP) Brightness Level; value ranges from 0 to 255
DDI0 DDC Pull Type
Pull Up 1K
Pull Up 2K
Pull Up 5K
Sets DDI #0 Pull-up values
DDI1 DDC Pull Type
Pull Up 1K
Pull Up 2K
Pull Up 5K
Sets DDI #1 Pull-up values
Integrated Graphics Device
Enabled / Disabled
Enable the Integrated Graphics Device (IGD) when selected as the Primary Video Adaptor, or always
disable it.
Primary Display
IGD / PCIe / HG
Select which of IGD / PCIe /HG graphics device should be the Primary Display
HG Delay After Power Enable
[0..1000]
Delay in milliseconds after power enable
HG Delay After Hold Reset
[0..1000]
Delay in milliseconds after hold reset
RC6 (Render Standby)
Enabled / Disabled
Permits to enable the render standby features, which allows the on-board graphics entering in standby
mode to decrease power consumption
GTT Size
2 MB / 4 MB / 8 MB
Select the GTT (Graphics Translation Table) Size
Aperture Size
256 MB
Use this item to set the total size of Memory that must be left to the GFX Engine
DVMT Pre-Allocated
64M / 96M / 128M /
160M / 192M / 224M /
256M / 288M / 320M /
352M / 384M / 416M /
448M / 480M / 512M
Select DVMT5.0 Pre-Allocated (Fixed) Graphics Memory size used by the Internal Graphic Device
DVMT Total Gfx Mem
128M / 256M / MAX
Select the size of DVMT (Dynamic Video Memory) 5.0 that the Internal Graphics Device will use
Cd Clock Frequency
144 MHz / 288 MHz /
384 MHz / 576 MHz /
624 MHz
Select the highest CD Clock frequency supported by the platform
GT PM Support
Enabled / Disabled
Enable / Disable GT Power Management Support
PAVP
Enabled / Disabled
Enable / Disable Protected Audio Video Playback (PAVP)
