2.2
Technical specifications
Processors
NXP i.MX 8 Family of processors, based on ARM
®
Cortex
®
-A72 Core + ARM
®
Cortex
®
-A53 Core + Cortex
®
-M4F core platform:
•
i.MX 8 QuadMax:
Dual A72-core, Quad A53-core, Dual M4F-core
•
i.MX 8 QuadPlus:
Single A72-core, Quad A53-core, Dual M4F-core
Memory
64-bit soldered down LPDDR4-1600 memory, up to 8GB total
Graphics
2x Graphics accelerators Vivante GC7000/XVSX or GC7000Lite/XVSX (QuadMax
and QuadPlus)
1x embedded VPU, supporting H.265(4K30) and H.264(1080p60) decoding and
H.264 (1080p30) encoding
Supports 3 independent video outputs (total combined resolution 4K)
Video Interfaces
OUTPUTS:
HDMI 2.0a Tx interface
Optional eDP 1.4 interface
Optional Single/Dual-Channel 18-/24- bit LVDS interface
INPUTS:
HDMI 2.0a Rx interface
2x 4-lanes MIPI-CSI Camera interfaces
Video Resolution
HDMI: up to UltraHD (4K)
LVDS, eDP: up to 1080p
Mass Storage
eMMC 5.1 Drive soldered on-board, up to 64GB
1x S-ATA interface available on M.2 Socket 2 Key B Slot
microSD Card Slot
4MB QuadSPI Flash NAND (boot device only)
Networking
2x Gigabit Ethernet interfaces
Combo WiFi 802.11 a/b/g/n/ac + BT LE 4.2 module
M.2 Socket 2 Key B Slot for M.2 Modems
M.2 Socket1 Key E Slot for WiFi + BT external modules
USB
1 x USB 3.0 Host port on Type-A socket
1x USB 2.0 OTG port on micro-AB socket
1x USB 2.0 Host port on external Type-A socket
1x USB 2.0 Host port on internal connector
2 x USB 2.0 ports available on M.2 Key B and Key E slots
PCI-e
2x PCI-e x1 ports, available on M.2 Socket 1 Key E and on M.2 Socket 2 Key B
Audio
I2S Audio Codec
HP + MIC combo TRRS audio connector
Serial Ports
1 x UART TTL
1 X RS-232 / UART TTL configurable
1 x RS-485 / RS-422 / UART TTL configurable
3x CAN interfaces
Other interfaces
4x Analog Inputs
6x GPIOs
SPI interface
I2C interface
Embedded additional RTC circuitry for lowest power
consumption
SIM dedicated slot
Power supply voltage:
+12V
DC
± 10%
Operating temperature**:
0°C ÷ +60°C (commercial version)
-40°C ÷ +85°C (industrial version)
Dimensions:
Supported Operating Systems:
Wind River Linux
Yocto
Android
** Measured at any point of SECO standard heatspreader for this product,
during any and all times (including start-up). Actual temperature will widely
depend on application, enclosure and/or environment. Upon customer to
consider application-specific cooling solutions for the final system to keep the
heatspreader temperature in the range indicated.
Please also check paragraph 4.1
