background image

 

 

©2007 Parts and Pumps, all rights reserved.  No liability is accepted for incorrect application or faulty installation by end user.   

www.partsandpumps.co.uk

 

 

9. Testing Data 

 
 

a)  Solenoid resistance table 

 
Voltage: 230V, 50Hz 
Tolerance: +/- 10% 
SLL-20 & 30 models: Solenoids are in series connection 
Other models: Solenoids are in parallel connection 
 
 

 

Total R 

Single R 

SLL-40 

86.5

173.0

SLL-50 

60.8

121.7

EL-60 

36.7

73.4

EL-80-15 

21.9

43.7

EL-80-17 

33.1

66.2

EL-100 

20.0

40.0

EL-120W 

16.2

64.7

EL-150 

16.6

66.2

EL-200 

10.0

40.0

 

 

10. Spare Part Kits 

 
 
Only use genuine SECOH replacement parts. Non-standard parts will have a 
detrimental effect on overall pump life and performance.  
 
In order to ensure long service and operation, it is recommended diaphragms 
and valve boxes are replaced once a year. 
 

All

 parts; magnets, filters, service kits and diaphragms are available from 

www.partsandpumps.co.uk

 online site and can be despatched immediately.   

 
We also stock a complete range of Secoh pumps for replacement purposes 
and these can also be used to replace defective pumps of other brands with 
ease. 
 

Summary of Contents for SLL-20















Reviews: