Pull the seat base sleeve over the seat base
and ensure general alignment.
01
Incline the backrest all the way forward.
03
Slide seat base sleeve through the gap between the backrest and base. Gently tug the quick-release
buckles to ensure a better fit.
04
Clip and secure quick-release buckles below the seat base and ensure that the
straps are placed above the tilt levers.
05
Adjust seat base sleeve for the best fit.
Lightly tug the sleeve inwards or outwards
to align the seams and accents of the
sleeve with the edges of your chair.
06
Align the side of the sleeve insert with the side
of the recline cover, then slide it in.
a.
b.
Tuck the top of the sleeve insert into the gap
between the seat base and recline cover.
SEAT BASE SLEEVE ASSEMBLY
Once the seat base sleeve is on, slide in the
sleeve inserts on the left and right sides of
the seat base sleeve. Ensure they are
securely slotted in.
02
Note:
When installing the right sleeve insert, do
not apply any pressure on or pull the recline lever
to prevent accidentally adjusting the backrest.
PAGE 2 OF 2
