Made in Germany
www.secu-gmbh.de
•
Attention: Any changes of the administrator code and of the user
codes shall be made with the safe door opened!
•
When the locking system has been reset to another code, this
new code should be repeatedly used with the safe door opened.
1.1 Description of basic functions
You can program your lock based on the following description.
You can see the programming instructions on the display. To program the
lock (enter
into the menu), please press the “Function” key, when the symbol
“M” is displayed. You can move within the menu using the keys “1” scroll up
(symbol on display) and “2” scroll down (symbol on display). When the
symbol “<” is displayed, you can use the “Function” key to skip to the next
higher menu level, and choose a particular menu
item using the “Enter/On” key.
The battery symbol indicates the current battery status:
███
■
: Battery full
[ ]
■
: Battery empty (please replace the batteries)
1.2 Description of programming and user mode
Please find the menu structure shown on the following pages. Also the
navigation is indicated. Additionally, each of the menu items is clarified:
Code change menu
Change of the administrator and user codes
Language/Sprache menu
Language setup
E-Key synchronization menu
In this program, the channel of the E-Key is adapted to the channel of the
input unit.
This function is necessary when the radio channel of an input unit is modified,
although other radio keys (with the old channel setup) are still logged.
Info menu
Indication of version and serial number
SNA: Lock serial number
Administrator menu
This includes all the menus that can be used only with the administrator
authorizations. They include:
•
Create User
Users can be created here. A user has either a code, or an E-Key, or
both. A separate user is always created for a fingerscan. Anatomically,
there are people, the fingerprints of whom are not sufficiently articulated
for the system.
SELO-B
2
SELO-BF
2
SELO-BFE
2
3
•
Assign E-Key
An E-Key can be additionally assigned to a selected user here.
•
Delete
Users and E-Keys can be deleted here. When a user is deleted,
also the code and the E-Key belonging to the user are deleted.
When an E-Key is deleted, the user is retained. To delete a
fingerscan, the corresponding user has to be deleted. To
delete all the fingerscans
, please use the “FS-Reset” function (see
below). *.
•
Time
Entry of the time and calibration of the clock. The clock is
automatically calibrated between two specific times. Exceptions
are a replacement of batteries and the switchover from summer to
winter time.
•
Date
Entry of date
•
Radio Channel
The radio channel can be set up here (12 channels to select
from). This can be required when the radio channel is already
used by another application, e.g. WLAN. In case of collision with
WLAN systems, a space of three channels is recommended.
•
Priority:
In case the door cannot be opened after several attempts with the
E-Key, the priority of the door can be increased by this function.
Inversely, also the priority of other door within the direct
environment can be reduced.
•
Restructure:
The use of this function is recommended when several users have
been deleted.
•
Register:
When either the lock unit or the keyboard is replaced, the two
units are newly tuned to each other.
•
FS-Reset*:
All the stored fingerprints are deleted, however, the corresponding
users are retained. Please select this menu and follow the
instructions on the display also in case of repeated error functions
related to the use of fingerscans.