-- page 3 --
SELO-C-Standard-Betriebsanleitung-englisch.p65
Enter the setting mode to change one of the codes
ONLY CHANGE THE LOCK SETTINGS WITH THE SAFE DOOR OPEN AND BLOCKED. DO NOT MAKE UP
NUMBER CODE OF PERSONAL DATES (i.e. no wedding anniversaries, birthdays etc.)
1.
Press
On/Enter
key. When the lock is ready for operation, the welcoming phrase on the display is followed after eight
seconds by a message prompting the operator to enter a valid code. The black rectangular cursor symbol will blink
in the position of the first random figure of the code entry range and the capital letter “
M”
appears above the
Function
key.
2.
By pressing the
Function
key, the menus of the setting mode appear. In this mode, the symbols above keys
“1”
and
“2”
serve as operating symbols to navigate through the menu (up or down). The first menu to appear is
Code change.
Use keys
“1”
and
“2”
to activate the other options on the menu.
Changing the administrator code (factory setting 1 2 3 4 5 6 7)
1.
As soon as you enter the setting mode, the cursor will automatically go to
Code change
. To select, press the
On/Enter
key.
2.
Next, the administrator and the various users are depicted on the display with the administrator in first place. To select
the administrator, press
On/Enter
.
3.
The lock will now ask you to enter the old code used thus far by displaying the word
CODE.O:
. Key-in the old code
(when taking the lock into operation the first time, enter the factory setting 1 2 3 4 5 6 7) and confirm with the
On/
Enter
key
.
4.
Next, the lock prompts the operator to enter the new code by displaying the word
CODE.N:
. Key-in the new code
and confirm by pressing
On/ Enter
. As a safety feature, the lock prompts the operator to enter the new code a second
time by displaying the word
CODE.R:
. Confirm once more by pressing the
On/Enter
key.
5.
The lock confirms the successful change of the administrator code by means of the message
Code change
completed!
; if the operation was not successful, the message will read
Code change error!
. You can leave the active
menu field in the setting mode by pressing the
Function
key whenever you see the symbol
“<“
above the key. After
leaving the setting mode, the lock is again ready for clearing. The operator is prompted to enter a valid secret code.
Changing an existing user code
1.
As soon as you enter the setting mode, the cursor will automatically go to
Code change
. To select, press the
On/Enter
key.
2.
Next, the administrator and the various users are depicted on the display with the administrator in first place. In the
setting mode, the symbols above keys
“1”
and
“2”
serve as operating symbols to navigate through the menue (up
or down). Using keys
“1”
und
“2”,
go to the user whose code is to be changed. Select the desired user by pessing
On/Enter
.
3.
The lock now prompts the operator to key-in the user’s old code far by displaying the word
CODE.O:
. Enter old code
and confirm by pressing
On/Enter
.
4.
Next, the lock prompts the operator to key-in the user’s new code far by displaying the word
CODE.N:
. Enter new
code and confirm by pressing
On/ Enter
. As a safety measure, the lock prompts the operator to enter the new code
a second time far by displaying the word
CODE.R:
. Enter code and confirm once more by pressing the
On/Enter
key.
5.
The lock confirms the successful change of the user code by means of the message
Code change completed!
; if the
operation was not successful, the message will read
Code change error!
. You can leave the active menue field in
the setting mode by pressing the
Function
key whenever you see the symbol
“<“
above the key. After leaving the
setting mode, the lock is again ready for clearing. The operator is prompted to enter a valid secret code.
D) CHANGING THE LANGUAGE
Entering the setting mode to change the language setting
1.
Press
On/Enter
key. When the lock is ready for operation, the welcoming phrase on the display is followed after eight
seconds by a message prompting the operator to enter a valid code. The black rectangular cursor symbol will blink
in the position of the first random figure of the code entry range and the capital letter “
M”
appears above the
Function
key.
2.
By pressing the
Function
key, the menue of the setting mode appears. In this mode, keys
“1”
and
“2”
serve as
operating symbols for menue navigation (up or down). The first menue to appear is
Code change.
Use the same keys
“1”
and
“2”
to address the other options on the menue.
