36
on the reader plate. Next, place the sequence of cards representing the last
Access Card number in the block on the reader plate. Finally, place the
“VALID” card on the reader plate.
Example: Program cards 25 through 37 into Time Zone 1.
2 + 5 +
*
+ 3 + 7 + VALID
PROGRAM A BLOCK OF CARDS INTO TIME ZONES 2 THROUGH 15
. Place
the sequence of cards representing the first Access Card number in the block
on the TOUCH CARD® reader plate. Then, place the “*” (THRU) card on the
reader plate. Next, place the sequence of cards representing the last Access
Card number in the block on the reader plate. Then, place the “*” (THRU) card
on the reader plate again. Next, place the sequence of cards representing the
Time Zone on the reader plate. Place the “*” (THRU) card on the reader plate
again. Finally, place the “VALID” card on the reader plate.
Example: Program cards 5 through 22 into Time Zone 6.
5 +
*
+ 2 + 2 +
*
+ 6 +
*
+ VALID
VOID A SINGLE CARD.
Place the sequence of cards representing the card
number on the TOUCH CARD
®
reader plate, followed by the “VOID” card.
Example: Void card number 17.
1 + 7 + VOID
VOID A BLOCK OF CARDS
. Place the sequence of cards on the TOUCH
CARD
®
reader plate representing the first Access Card in the block. Then,
place the “
*
” (THRU) card on the reader plate. Next, place the sequence of
cards representing the last Access Card in the block. Finally, place the “VOID”
card on the reader plate.
Example: Void cards 24 through 28.
2 + 4 +
*
+ 2 + 8 + VOID
Summary of Contents for ENTRACOMP 28SA Plus
