Secura Key SK-ACPE, User & Installation Manual

SK-ACPe   

            InStAllAtIon  &  oPerAtIng  MAnuAl 

SPECIFICATIONS

SK-ACPE-LE

PHYSICAL

Depth  

3.0” 

(7.62 cm)

Width  

10.0” 

(25.40 cm)

Height  

11.0” 

(27.94 cm)

Weight 

68.8 oz.  (1.95 kg)

                               Housing Material is All Steel; Color is Beige

POWER REQUIREMENTS

16.5-24VAC (50-60 HZ), 40 VA or 16-30 VDC, 500 mA       

If RK-WL readers are used, recommend a 16.5-24 VAC 40 VA transformer.

A 12 VDC Power Supply may be used if connected to Battery Back-Up Leads. 

BACK-UP BATTERY

12 V, 4 Ah (Optional, Sold Separately)

CARD READERS

Connect two card readers with two-line Wiegand output, up to 40 bits. While the Card Data  

Format can vary, the Card ID bit length should not exceed 16 bits, which provides a maximum  

Card ID of 65,535. Provides 14 VDC, 400 mA max. power for each card reader. 

SOFTWARE

SK-NET

TM

 Software    

Version 3x or greater

OUTPUTS

 -  2 Per Door (Total of 4)  Latch & Alarm Shunt  

DPDT contact, 5A, up to 250 VAC or 30 VDC

Auxiliary   

DPDT contact, 2A, up to 220 VAC or 30 VDC 

INPUTS

 - 2 Per Door (Total of 4) 

Auxiliary 1  

Requires SPST contact closure

Auxiliary 2  

Requires SPST contact closure

COMMUNICATION

RS-232    

5-Wire Shielded Cable

RS-485    

Single Twisted Pair, shielded cable with a signal ground

Wiegand Input (2)   

Programmable up to 40 bits

14 VDC @ 400 mA supplied to each reader, 

Modem 

Requires Hayes compatible - 1.2 to 38.4k baud

Printer 

Serial Printer (or Parallel printer with serial converter)

ENVIRONMENT

Ambient Temperature 

-40° F to 158° F (-40° C to 70° C)

Humidity   

0% to 95% relative humidity (non-condensing)

OPERATIONAL

Card Capacity 

65,535 (Highest card number = 65,535)

Time Zones 

15 for card access, one door unlock; full week plus   

holiday in one-half hour segments; 32 programmable  

holidays; selectable automatic daylight saving time. 

Facility Code 

Up to 16 different codes simultaneously (max. # of cards 65,535) 

Latch/Alarm Shunt Timer 

Programmable from 1/4 to 30 seconds

Antipassback 

Real or Timed (1 to 30 minutes); hard or soft

Auxiliary Inputs (2 Per Door) 

Programmable for door monitor, tamper monitor, remote    

open, remote inactive, bell, arming circuit or user defined

Auxiliary Output (1 Per Door)  Output is programmable to activate under one of many    

possible alarm conditions, time zone or card violations.

Limited Use Cards   

65,535, programmable from 1-500 uses, days, weeks or    

number of days after first use.

Transaction Storage   

10,000 events

Memory   

Non-volatile

This product complies with UL 294 Standards, CE (European Standards), and with Part 15 of Class B FCC Rules.

B-2