12 P0031-LU-01.00
Bypassing Zones -
B
When a zone is bypassed it is prevented from causing an alarm. This feature can be used to
temporarily remove the protection of one or more detection zones when arming the system.
To bypass one or more zones, please proceed as follows:
Ur
User Menu:--
01: Stay Arm 1
Bypass Zone: --
Zones Bypassed are:
Enter your access code
.
????
Enter zone number followed by
*
e.g. enter 3* for zone 3.
.
By
BY
The display scrolls the bypassed zones.
Repeat step 3 to add or remove zones.
When finished press
to exit bypass menu.
R
Press the
B
key.
03
Bypass Zone: --
03: Lounge
Bypass Zone: --
Zones Bypassed are:
Bypass on
The selected zone(s) are now bypassed:
Press
to away arm.
Press
to stay arm.
Enter
to exit the user menu.
A
S
99*
User Menu:--
01: Stay Arm 1
Ur
If the Quick Bypass feature is enabled at the selected remote keypad, you may
omit step 1 when bypassing zones from the above procedure.
If the “Reinstate Bypassed Zones on Disarm” option is enabled by your installer,
the selected zones are automatically reinstated when the system is disarmed.
To reinstate a bypassed zone simply select the zone at step 3 in the above
procedure.
