26 P0031-LU-01.00
Speech Dialler Telephone Numbers
The onboard communicator also features a 4 channel speech dialler which can be used to
call landline or mobile telephones to play a recorded voice message. Each channel can have
two telephone numbers assigned. When the channel is triggered the onboard communicator
will dial the number specified by the dial sequence and play the voice message associated
with the channel for up to 1 minute. Pressing the [#] key on the telephone handset
acknowledges the call and stops the dial sequence, pressing any other key also
acknowledges the call, but the dial sequence will continues with next number.
To program the Speech Dialler Telephone Numbers, please proceed as follows:
Channel 1 Tel No.2:
ÿ
Channel 1 Tel No.2:
012355667788ÿ
Enter option number:
: Channel 1 - Tel No. 1
73
11
73
1
2
73
1
3
*
:
:
Then press
to edit.
e.g. Enter 7321* for Channel 1 Tel No 2.
Channel 2 - Tel No. 1
Channel 3 - Tel No. 1
: Channel 4 - Tel No. 1
: Channel 1 - Tel No. 2
: Channel 2 - Tel No. 2
: Channel 3 - Tel No. 2
: Channel 4 - Tel No. 2
73
1
4
732
1
7322
7323
7324
Ensure that User Program Mode is selected.
User Menu:--
Option:----
Enter telephone number,
e.g, “012355667788”.
Press
to accept and return to step
.
Press
to cancel and return to step
.
Press
to accept and move to next option.
*
R
#
Ì
Ë
Ur
73 21 =
73 21 =0 12
...
The speech dialler feature must be enabled and configured by your installer. Each
channel will be assigned to an event type, e.g. channel 1 could be assigned to the
“Fire Alarm” event and channel 2 to the “Intruder Alarm” event.
