P0031-LU-01.00 35
13.
Access your alarm system as described in the “Remote Access” section.
14.
After the main menu has finished playing, enter
*9?#
(where ? is 1 to 5) on your
touch-tone phone. The system will prompt you with the current output status:
“Output ? Off.”
15.
To switch the output to the opposite state, enter
*9?#
(where ? is 1 to 5) on your
touch-tone phone. The system will prompt you with the new output status:
“Output ? On.”
16.
Repeat steps 2 and 3 for other outputs or enter
*#
to play the main menu.
17.
To end the remote access session, enter
*99#
on your touch-tone phone.
No
Remote Control Function
1
2
3
4
5
Record and Playback Speech Messages
The four speech dialler messages can be recorded and played back, providing the system is
remotely accessed with either user 00 (engineer) or user 01 (master).
To playback a speech dialler message from a remote location, please proceed as follows:
18.
Access your alarm system as described in the “Remote Access” section.
19.
After the main menu has finished playing, enter
*7?#
(where ? is 1 to 4) on your
touch-tone phone. The selected message is played back over the telephone.
20.
Repeat step 2 for other messages or enter
*#
to play the main menu.
21.
To end the remote access session, enter
*99#
on your touch-tone phone.
To record a speech dialler message from a remote location, please proceed as follows:
22.
Access your alarm system as described in the “Remote Access” section.
23.
After the main menu has finished playing, enter
*8?#
(where ? is 1 to 4) on your
touch-tone phone. Speak loud and clear the message you want to record, when
finished press the
#
key.
24.
Repeat step 2 for other messages or enter
*#
to play the main menu.
25.
To end the remote access session, enter
*99#
on your touch-tone phone.
