ProLogic L22
Operation Instructions
26
The ProLogic L22 has the ability to establish a management rule related to the Dual Mode function. This
management rule is established in the menu selection “Dual Mode Group ID”. By enabling this function,
the available User codes of the lock are divided into two groups: Group A would be “Dual Mode
Managers” and Group B would be “Dual Mode Users”.
As you enter this menu selection, the system automatically defaults to “15”**(See NOTE below)- this
means that a User Code from ID00 to ID15 (Group A) must be entered with a second code from ID16-
ID30 (Group B) in order to open the safe lock. Also Manager Codes are no longer Dual Mode Override
Codes.
You can set this number to any number from 1-15 by using the
and
buttons. If you set the number
to 04 – any user code from ID05-ID30 (Group B) must be entered in conjunction with ID01,ID02,ID03 or
ID04(group A) to open the lock. The lock will not open if two users of the same Group enter their codes
and Manager Codes are no longer Dual Mode Override Codes.
If you set this number to 00, the function is turned off or disabled and normal Dual Mode rules apply –
any two valid codes can be entered to open the lock, and the Management Code (ID00, ID01, ID02) are
Dual Mode Override Codes.
**NOTE: If the ProLogic is set to PW/L 6digits and 10 Users, this number will be defaulted to 5 – not 15.
Step1: Press the Menu/OK button.
Step 2: Using the
and
, scroll to the System Menu and Press OK.
Step 3: The display will prompt you to enter a valid code. Enter either the Super Code (ID00) or
the Manager Code (ID01 or ID02). The “Select Menu” message will be displayed as follows:
Step 4: Scroll
to the menu selection “Enable Dual Mode” and Press OK.
Step 5: Now using the
and
buttons, specify which User ID will define Group A and press OK.
If you specify that this number is 00, the feature will be disabled and normal Dual Mode rules
will apply – two valid code to open the lock; Manager Codes are Dual Mode Override Codes.
If you specify that this number is 01, any Code from 02-30 must be used in conjunction with the
Manager Code ID01; and ID01 and ID02 are no longer a Dual Mode Override Codes.
11.0 Door Management
11.1 Max. Door Open Time
This menu selection allows you to set the length of time a door can be opened.
