Securam SafeLogic Basic EntryPad Operating Instructions Download

Page: 1 / 3

Important:

●

For indoor use only.

●

Battery Low Voltage: 5.2

0.2V.

The display will alert low battery when battery voltage

reaches 5.2±0.2V.

PLEASE REPLACE THE BATTERY IMMEDIATELY.

Battery Replacement Instructions

One 9V alkaline battery is installed in the SureLock Battery Management compartment in the

bottom of the

–II series EntryPad.



To replace the battery, pull out the battery compartment first.



Follow these steps:

Release the latch of the battery compartment, by pulling lever

downward, See Fig. 2.

Pull out the battery compartment from the bottom of the EntryPad,

See Fig. 3.

Doc.No.:BSU-EC0601AII130402

Version No.: V1.01 USER

SafeLogic Basic Operating Instructions

This manual is for the SafeLogic Basic EntryPad, EC-0601A-II, with

SureLock Battery

Management

system, used in conjunction with EL-0601, EL-0701, EL-0801 or EL-0901 lock bodies.

Summary of Contents for SafeLogic Basic EntryPad

Page 1: ...eries EntryPad To replace the battery pull out the battery compartment first Follow these steps o Release the latch of the battery compartment by pulling lever downward See Fig 2 o Pull out the batter...

Page 2: ...or lengthen the penalty time period It will continue to count through the 5 minute penalty time period c While the system is in penalty time removal of the batteries will interrupt the penalty time c...

Page 3: ...he same and the code changing process is successful e If Three Beeps sound the code change process has been unsuccessful The existing code is still valid Repeat steps a to d Note a Verify the new code...