Secure Power Ltd
User Manual
16
…………………………………………………………………………………………………………
3. Press
for more than 0.5 s but less than 2 s. The following is displayed.
4. Press
for more than 0.5 s but less than 2 s. OFF stops flashing.
5. Press
or
to display ON, which flashes.
6. Press
for more than 0.5 s but less than 2 s. ON stops flashing.
7. Press
for more than 2 s.
To disable switch to bypass mode:
■
Use the procedure above and select OFF instead of ON.
Output voltage level
To change the output voltage:
Caution:
Before changing the output voltage, turn off all loads and ensure they are rated for
the new output voltage.
1. On the front panel, press
for more than 2 s.
2. Press
or
until the following is displayed.
3. Press
for more than 0.5 s but less than 2 s. The following is displayed.
characters flash
characters flash
characters flash