Secure Power Ltd
User Manual
…………………………………………………………………………………………………………
5
Safety
WARNING!
THIS EQUIPMENT MUST BE INSTALLED, COMMISSIONED AND MAINTAINED BY A
QUALIFIED ELECTRICIAN.
There are dangerous voltages and high temperatures inside the UPS. During installation, operation and
maintenance please abide by local safety instructions, regulations and laws. Failure to do so may result in
injury to personnel or damage to equipment. Safety instructions in this manual are supplementary to local
safety instructions. Secure Power Ltd does not accept any liability caused as a result of failure to follow
safety instructions. Please note the following:
■
Do not use the UPS for any other purpose than the one for which it was designed.
■
Do not exceed the rated load of the UPS.
■
Under no circumstances open the UPS. There are high capacity batteries inside and other electronics
that can cause electric shock. If the UPS requires internal maintenance or battery replacement,
contact Secure Power Ltd.
■
Keep the UPS in a dry well ventilated location away from any area or situation in which there is a risk
of fire, such as direct sunlight or other sources of heat.
■
If the UPS emits smoke, turn off immediately the input circuit breaker and, if fitted, the battery circuit
breaker, and contact Secure Power Ltd.
WARNING!
THIS IS A PRODUCT FOR COMMERCIAL AND INDUSTRIAL APPLICATION IN THE
SECOND ENVIRONMENT INSTALLATION RESTRICTIONS OR ADDITIONAL MEASURES
MAY BE NEEDED TO PREVENT DISTURBANCES (AS STATED IN EN62040-2:2006).
Warning symbols
The safety symbols used in this manual are shown in table below. They alert you to important safety
information that you need to be aware of when installing, operating and maintaining the UPS.
Safety Symbol
Indication
Attention
Static discharge sensitive
Electric shock
Caution:
A caution describes a situation in which there is a risk of damage to equipment.
WARNING!
A WARNING DESCRIBES A SITUATION IN WHICH THERE IS A RISK OF INJURY OR
DEATH TO PERSONNEL.