Configuring Switches
121
Configuring Switches
Switches are used to organize Spans according to the PBX to which they
belong and to configure SMDR, NFAS, SS7 Groups, and Call Recording
Protected Extensions. Switches are configured in the
Telco
Configuration
subtree in the Performance Manager tree pane.
Configuration consists of the following sequence of steps:
1.
Create a Switch to represent the PBX. The Switch contains the SMDR
configuration fields and enables NFAS and SS7 Group definition.
2.
Move all Spans that are to use the SMDR data, AAA tokens, Access
Codes, Protected Extensions, NFAS, and/or SS7 groups to the Switch.
3.
Do one or more of the following, depending on Span type:
Configure the Switch with SMDR settings specific to the PBX in
use, including the associated Access Code Set and list of Protected
Extensions.
Define NFAS Groups.
Define SS7 Groups.
To create a Switch
1.
Right-click the
Telco Configuration
subtree, and then click
Manage Switches
. The
Switches
dialog box appears.
2.
Click
New
. The
New Switch
dialog box appears.
Creating a
Switch
