7 Menu Network
Securepoint 10
Securepoint
Security Solutions
45
7.2.1.3 Add PPTP interface
A PPTP interface is used for connecting the internet by Point to Point Tunneling Protocol.
This protocol is primarily used in Austria.
Click
Add Interface
.
The
Interface Wizard
appears.
Select the desired interface type (in this case
PPTP
).
Click
Next
.
The configuration window of
PPTP Interface
appears.
Select in the field
Interface
to which physical Interface the PPTP interface should be
bound to. This should be the external interface. It will be replaced by the PPTP inter-
face after completion.
Enter an
Local Ethernet IP Address
and
Mask
the IP-address and the subnet mask
of the interface.
The field
Modem IP Address
expects the IP-address, which is assigned to you by
the internet service provider.
Select a provider from the dropdown field
DSL-Provider
, which is used to connect
the internet.
If you did not create a DSL provider yet, select the entry
new
and add a provider. En-
ter the required data into the fields
Provider Name
,
Username
and
Password
.
Click
Finish
to complete the configuration.
After the interface is added, you have to press the button
Update Interface
.
fig. 45 add PPTP interface - set properties
