9017-0707
2 12
STACK-ON PRODUCTS COMPANY
P. O. BOX 489
WAUCONDA, IL 60084
5
6
7
INSTALLATION OF SCOPE STAND-OFF
NOTE: The scope stand-off will function properly for many combinations of guns with
scopes.
Screw the scope stand-off into the pilot hole of the barrel rest. (See figure 8)
IMPORTANT
Keep keys away from children. Keep this record of your serial and key
numbers in a secure place separate from your security cabinet. If you
lose your keys you will need this information as a reference for obtaining
new keys. To order a replacement key set, follow the instructions on the
attached form.
INSTALLATION OF GC-900-5 PISTOL-AMMO CABINET ON TOP OF
SECURITY CABINET
NOTE:
We recommend that security cabinet be installed as described above.
IMPORTANT:
Install the shelf before mounting the cabinet to a wall.
Remove the top hole plugs from the cabinet by pushing out from the inside of the cabinet.
Place the GC-900-5 on top and assemble with (2) 1/4-20 nuts and bolts. Do not tighten
bolts. (See figure 6)
Drill (4) 3/16" pilot holes into the wall studs and secure the GC-500-5 cabinet to the wall
using (2) lag bolts and washers. (See figure 6)
Tighten the (2) bolts that connect the cabinets.
MODEL GC-900-5
PISTOL-AMMO CABINET ASSEMBLY
IMPORTANT:
Install the shelves before mounting the cabinet to a wall.
Install each shelf with (4) 10-32 nuts and bolts. (See figure 5)
Place foam pad in bottom of cabinet.
