103
You can refer to the Appendix for recommended HDD brand. Please use HDD of 7200rpm or
higher.
Please follow the instructions below to install hard disk.
All the figurers listed below are for reference only. Slight difference may be found on the front or
rear panel.
3.3.1 SMART 1U Series
3.3.2 1U series
This series DVR has two SATA HDDs. Please use HDD of 7200rpm or higher.
1. Loosen the screws of the
upper cover and side panel.
2. Fix four screws in the HDD
(Turn just three rounds).
3.
Place the HDD in accordance with
the four holes in the bottom.
4. Turn the device upside down
and then turn the screws in
firmly.
5.
Fix the HDD firmly
.
6. Connect the HDD cable and
power cable.
7. Put the cover in accordance
with the clip and then place the
upper cover back.
8. Secure the screws in the
rear panel and the side panel.
Summary of Contents for DVR-HD016240M
