The remote control is not waterproof! Avoid direct contact
with water.
Operation
The function of the keys is shown in fig. 1. In order to prevent a faulty
operation, you have to keep the key pushed, until the red LED at your
remote control lights up.
You can operate your alarm system with the remote control only within
the typical radio range (less than 30 meters).
Changing the battery
Open the housing, by removing the screw at the bottom side. Remove
the empty battery and replace it by the same type of battery (CR 2032,
Li-Mn 3V). Remount the bottom side and screw the housing.
Programming
Read the manual for the individual programming of the buttons.
Notes
Only the radio remote control with the article number FU5150 has a
panic alarm function. This function is automatically learned into the panel
and does not need to be learned in separately. The panic alarm is
activated when you press the buttons 3 and 5 (see fig 1.) simultaneously.
