EPA Wood-Burning Fireplace
P/N 506128-16 REV. K 10/2011
BISTRAD
MODEL
BIS™ Tradition
This installation manual will enable you to obtain a safe, efficient and
dependable installation of your fireplace system. Please read and
understand these instructions before beginning your installation.
Do not alter or modify the fireplace or its components under any circum-
stances. Any modification or alteration of the fireplace system, including
but not limited to the fireplace, chimney components and accessories,
may void the warranty, listings and approvals of this system and could
result in an unsafe and potentially dangerous installation.
Security™ wood-burning fireplaces are designed for use as a supple-
mental heater. They are not intended for continuous use as a primary
heat source.
INSTALLATION AND
OPERATION INSTRUCTIONS
SAVE THESE INSTRUCTIONS
FOR FUTURE REFERENCE
Listed to standards:
ULC-S610 and UL-127
Report No. 304-7213
EPA Cert. No. 609
WARNINGS
•
Hot! Do not touch! The glass and
surfaces of this appliance will be hot
during operation and will retain heat
for a while after shutting off the appli-
ance. Severe burns may result.
•
Carefully supervise children in the
same room as appliance.
•
If small children are present in the home, it is
recommended that this appliance be fitted with
an adjustable safety gate or barrier screen.
PIBISTRAD REV. 10 10/2011
WARNINGS
• The fireplace cannot be operated without a door
or firescreen. Consult your dealer to select the
correct replacement door or firescreen.
• The fireplace is equipped with a blower, electri-
cal connection must be made prior to fireplace
installation
• Important! To assure proper alignment of glass
doors: Install this fireplace in a square and
plumb condition, using shims as necessary at
sides and/or bottom.
• Install the fireplace only as described in these
instructions.
Summary of Contents for BIS Tradition BISTRAD
Page 25: ...NOTES 25 ...
