Combustible materials can NOT be used in the space
directly above the fireplace. Do not fill the space
above the fireplace with any material (Except the
wood framing)
F
21-1/2”
J
20-3/8”
E
7’
Min.
2” x 3’
Min.
D
Fireplace Framing
Header
B
A
OUTSIDE CHASE
G
H
C
L*
A
Back Wall of Chase/Enclosure
Including Finising Materials if any
Rough Framing Face (Unfinished Shown)
* Zero Clearance From Back Spacer to Wall
Corner Installation
*
Total depth is 25-1/2 inches
including the back spacer
minus 1/2 inch for drywall to
be flush with the facing.
36"
36"
40-3/4"
16-3/8”
12-3/8"
22-3/4"
27-3/4"
1"
9-1/4"
28-1/8"
22-7/8"
10-1/4"
13-7/8"
24"
1-1/2"
24"
3-1/2"
10-1/8"
10-1/8"
26-5/8"
13-7/8"
26-5/8"
14-1/8"
3-3/4"
Figure 11 - Fireplace and Framing Dimensions
Notes
Diagrams, illustrations and photo-
graphs are not to scale – consult
installation instructions. Product
designs, materials, dimensions,
specifications, colors and prices are
subject to change or discontinuance
without notice.
All framing dimensions calculated
for 1/2" dry wall at the fireplace face.
If sheathing the chase or finishing
with other thickness materials,
calculations will need to be made.
* The fireplace must not be in contact
with any insulation or loose filling
material. Cover the insulation with
Drywall panels around the fireplace.
FRAMING DIMENSIONS
A
36-1/4”
921 mm
B
40-3/4”
1035 mm
C
28-1/8”
714 mm
D
13-1/4
337 mm
E
76-3/4”
1950 mm
F
38-3/8”
975 mm
G
*25”
635 mm
H
24-1/2”
622 mm
J
54-1/4”
1378 mm
K
8”
203 mm
L
1”
25 mm
K
Combustion
Air Kit
7’
Min.
B
G
2” x 3”
Min.
Rough Framing Face
(dimension includes finish
material inside framing, if any)
Plywood 1/2”
10-9/16”
20-3/16”
25-9/16”
5-3/8”
3-3/8”
29-5/16”
Dimensions with clean face obstruction plate kit installed
11
NOTE: DIAGRAMS & ILLUSTRATIONS ARE NOT TO SCALE.
